How to Build a Calming Lavender Bath with Salts and Oil
By Chemists and Perfumers since 1790 D R Harris London | Published: 2026-11-03
Category: 操作指南
Layer D.R. Harris Lavender Bath Salts and Lavender Bath Oil for a relaxing soak. Follow the steps for dosing, water temperature, and post-bath care.
Quick answer
Draw a warm bath, dissolve a handful of Lavender Bath Salts, then add a capful of Lavender Bath Oil just before you get in. Soak for 15–20 minutes and rinse if your skin feels slick.
Why layer salts and oil instead of choosing one
Salts and oil do different jobs. The salts dissolve to soften the water and release lavender aroma, while the oil leaves a light moisturising layer on the skin. Using both gives you the scent and the skin feel in one soak.
The trade-off is that oil makes the tub slippery. If you have limited mobility or share the bath with someone who prefers a matte finish, use the oil alone or rinse the tub thoroughly after.
How much salt is enough
Start with two tablespoons (about 30 g) of bath salts for a standard tub. You can add more if the water is very hot or the tub is large, but more salt does not make the soak more relaxing—it just makes the water feel silkier and the scent stronger.
If you have sensitive skin or are trying the salts for the first time, begin with one tablespoon and see how your skin feels after ten minutes.
When to add the oil
Add the oil after the salts have dissolved and the water has stopped running. Oil added to a filling tub can coat the sides before you get in, and it may not disperse as evenly. A capful stirred through the water is enough to fragrance the bath and moisturise the skin without leaving a sticky film.
Your step-by-step lavender bath routine
- Start with a clean tub: Rinse the bath before filling. Oil can cling to leftover soap residue, which makes the tub harder to clean later. A quick rinse now saves scrubbing after.
- Fill with warm, not scalding, water: Run the bath to a comfortable temperature—aim for what feels warm to your wrist, not hot. Very hot water can dry your skin and make the lavender scent feel sharper. Test with your elbow if your hands are already warm.
- Add two tablespoons of bath salts: Sprinkle the salts into the running water or stir them in once the tub is full. Wait until they have fully dissolved before adding anything else. If you see crystals on the bottom, give the water another stir.
- Stir in one capful of bath oil: Add the oil after the water has stopped running. Swirl the water with your hand to disperse it—do not pour the oil directly under the tap. A capful is enough; more oil will float and feel greasy.
- Soak for 15–20 minutes: Set a timer so you do not lose track. If you feel lightheaded, get out slowly and drink water. Longer is not better—20 minutes is plenty for relaxation.
- Rinse and pat dry: If your skin feels slick, rinse off under a warm shower. Pat dry with a towel rather than rubbing, then apply moisturiser if needed. Rinsing prevents oil from transferring to clothes or bedding.
- Clean the tub right away: Rinse the tub with hot water and a little dish soap while it is still warm. Oil residue left to cool becomes sticky and harder to remove. Thirty seconds now beats a scrub tomorrow.
Product facts
- Lavender Bath Salts and Pot £54.50 - D R Harris London: Earthenware pot made by Burleigh in Stoke-on-Trent, containing lavender bath salts. The pot is reusable and keeps the salts dry between soaks, so you can store it on the bath edge without clumping.
Lavender Bath Salts and Pot £54.50 - D R Harris London - Lavender Bath Oil: A soft oil that leaves skin smooth but not sticky; a capful is sufficient to fragrance the bath and moisturise. You only need a small amount, so one bottle lasts many baths and won't leave a greasy residue if you measure roughly.
Lavender Bath Oil
